How to use and experience with tire sealant:
Preparation:
Shake the tire sealant: Hold the tire sealant in your hand and shake it quickly for about 1 minute to mix the liquid evenly.
Prepare tools: Make sure all tools (such as catheters and valve cores) are clean and free of impurities.
Operation steps:
Connect the catheter: Lift the outer catheter and connect the catheter port with the tire valve to ensure that the valve interface is stable and there is no leakage in the middle.
Inject tire sealant: Tear off the fixing ring on the top of the tire sealant bottle, turn on the switch, and the tire sealant will run with the tire. Wait for the tire sealant to be injected into the tire, and close the valve counterclockwise after the injection.
Check the sealing: After the tire sealant is injected, let the tire rotate quickly for several times to ensure that the tire sealant is evenly covered on the inside of the tire to form a sealing film.
Precautions:
Prevent air leakage: Try to hold the connection between the catheter and the valve with your hand, because it is easy to leak there.
Stop inflation: When you want to stop inflation, do not pull out the tube directly. First turn off the switch on the top of the bottle, otherwise the tire repair fluid will continue to spray out after the tube is pulled out.
Shake evenly: If you feel that the liquid in the compressed gas tank is not filled enough, you can stop filling and continue to shake it evenly before continuing.