Motorcycle Tire Sealant and Inflator

Emergency Sealing

Motorcycle Tire Sealant and Inflator can seal punctures within 3–5 km at tire speeds below 80 km/h, relying on a liquid fibrous sealant to rapidly fill and cure the puncture as the tire rolls.

Leak Prevention Protection

The sealant forms a 0.2–0.4 mm thick adhesive protective layer on the inner wall of the tire. The fibrous component fills the pores, and the adhesive cures to seal the crack.

Specifically Compatible
The formulation viscosity is optimized for 12–18 inch motorcycle tubeless tires, ensuring uniform distribution across different tire widths and constructions.

1. Remove the tire valve stem to bleed the air from the tire.

2. Shake the tire sealant well, then inject it into the tire.

3. Tighten the valve stem back on and rotate the tire to distribute the sealant evenly on the sidewall.

4. Inflate the tire to the standard pressure.

5. Remove the nail, rotate the tire to complete the repair, and the tire is ready to drive.

Specification: 43*35*18

Quantity: 80 bottles/carton

Total weight: 11.5kg

Hot Tags: motorcycle tire sealant and inflator, China motorcycle tire sealant and inflator manufacturers, suppliers, factory, Tire Seal For Car, Tyre Sealant For E Bike, Tire Sealant And Inflator For Mountain Bike, tire sealant and inflator, Tyre Sealant And Inflator For E Bike, Motorcycle Tyre Sealant And Inflator