Peculiarity:
Instant Sealing
Car Tire Sealant and Inflator seals punctures of 1–6 mm diameter within 3–10 seconds, rapidly filling the puncture and restoring tire pressure using high-polymer expanding foam.
Tire Pressure Stabilization
The product forms a 0.3–0.5 mm sealing film at the puncture site, preventing further leakage and maintaining basic tire pressure.
Wide Compatibility
The sealant is suitable for passenger cars, SUVs, motorcycles, and some tubeless tires, distributing evenly across different internal volumes due to its rheological properties.
The usage method is as follows:

(1) Connect the air hose of the air pump to the sealant inlet.

(2) Insert the sealant horizontally downwards into the slot of the air pump and secure it. Then connect the sealant injection tube to the valve and tighten it.

(3) Start the car engine beforehand, then plug the air pump power cord into the car cigarette lighter socket.

(4) Turn on the air pump switch, with the letter "I" facing down, and begin applying the sealant and inflating.
Note: When the pressure gauge shows 2.5 bar, manually turn off the air pump switch, disconnect the air hose from the tire, replace the valve cap, and put away the tire repair tools. The tire repair can be completed by driving slowly at a speed below 80 km/h for 3-5 kilometers.
Hot Tags: car tire sealant and inflator, China car tire sealant and inflator manufacturers, suppliers, factory, tube puncture liquid, best rechargeable tire inflator, 220v ac tyre inflator, tire liquid sealant, gel for tubeless tyre, tyre bead sealer







