E-Bike Tire Sealant and Inflator

Rapid Sealing
E-Bike Tire Sealant and Inflator typically achieve initial sealing within 5 minutes of puncture formation, relying on high-viscosity polymer latex to rapidly fill the pore under centrifugal force.

Reduced Damage Probability
The sealant forms a protective layer approximately 0.3–0.5 mm thick on the inner wall of the tire, reducing the risk of rubber tearing after repeated punctures.

Short Operation Time
The direct-injection structure allows for "plug-and-play" operation, enabling even non-professional users to complete the process independently.

1. Remove the tire valve stem to expel the air from the tire.

2. Shake the tire sealant well, then inject it into the tire.

3. Tighten the valve stem back on and rotate the tire to distribute the sealant evenly on the sidewall.

4. Inflate the tire to the standard pressure.

5. Remove the nail, rotate the tire so the puncture is facing down, and let it sit for 30 seconds to complete the repair.

Specification: 37.5*36.8*16.5

Quantity: 80 bottles/carton

Total weight: 8kg

Hot Tags: e-bike tire sealant and inflator, China e-bike tire sealant and inflator manufacturers, suppliers, factory, Tyre Sealant For Tricycle, Bicycle Tire Sealant And Inflator, Tire Sealant For E Vehicle, Tire Sealant For Motorcycle, Tyre Sealant For Motorcycle, Motorcycle Tire Sealant and Inflator