Foam Tire Sealant and Inflator for Car

Wide Applicability
Foam Tire Sealant and Inflator for Cars stably seals punctures of 1–6 mm, relying on rapidly expanding foam to fill the puncture.

Environmentally Adaptable
The foam remains active from -20°C to 60°C, functioning normally in extreme temperatures and muddy environments.

Safe Materials
The foam formula contains no corrosive ingredients and will not damage tire rubber or rim coatings.

Simple and Effective
The product uses its own pressure to inject and inflate, requiring no onboard power or additional tools.

(1) Shake the sealant well before use, then remove the safety cap from the safety valve.

(2) Tighten the sealant connection valve to the tire valve clockwise.

(3) After connection, invert the product and rotate the red valve clockwise.

(4) After inflation, close the valve counterclockwise and then disconnect the air intake pipe.

Note: Before turning the red valve stem, press the black area below the valve stem with your hand, then turn the valve switch. After inflating to full pressure, close the safety valve counterclockwise to remove any remaining sealant. Then, drive at a speed below 80 km/h for 3-5 kilometers to complete the tire repair.

Hot Tags: foam tire sealant and inflator for car, China foam tire sealant and inflator for car manufacturers, suppliers, factory, Bike Puncture Repair Kit, Tyre Sealant And Inflator For E Bike, Tire Sealant For Mountain Bike, Tyre Sealant And Inflator For Car, Tyre Sealant For Mountain Bike, Tire Sealant And Inflator For Street Trial Bike